Mold Transfer & Production
Move your existing mold from another supplier to Flymould for injection-molded part production. We review mold suitability, inspect the tool and verify trial samples against your requirements before production begins.
Continue Production with Your Existing Mold
If you are changing molding suppliers, your existing mold may provide a route to continued part production. We assess the tool together with the part requirements and your supply needs.
Changing Your Production Supplier
Bring an existing mold to Flymould when you need a new partner for ongoing injection molding.
Addressing Quality or Delivery Issues
Share the defects, inspection findings or supply concerns you want us to evaluate during the transfer review.
Consolidating Part Production
Review existing molds and repeat-order needs together when moving several parts to one production partner.
Review the Mold Before Transfer
Photos, tool details and part requirements help us assess whether your existing mold is suitable for production at Flymould before you arrange shipment.
Mold & Machine Compatibility
We review mold dimensions, weight, cavity count and available tool drawings alongside press fit, shot size, ejection, cooling and hot-runner requirements.
Tool Condition & Production History
Known wear, repairs, previous samples and operating records help identify issues to investigate. Tell us about flash, sticking, unstable dimensions or other recurring problems.
Part Requirements & Expected Demand
Your drawing revision, resin grade, appearance references and order quantities establish what the transferred mold needs to produce. We identify missing information and any further checks needed before acceptance.
Incoming Inspection & Mold Preparation
After arrival, we inspect the mold and compare its condition, supplied components and available records with the transfer information.
Check the Received Tool
We check cavity and parting surfaces, moving features, ejection and accessible cooling connections. Accessories, controllers and spare components are checked against the agreed handover list.
Identify Necessary Work
The findings establish whether cleaning, maintenance, repair or machine-interface adjustments are needed before trials. Our in-house toolroom supports agreed work within the reviewed scope.
Confirm Scope Before Changes
We discuss proposed repairs or modifications, their cost and their effect on timing with you before proceeding. Tool condition and trial results determine whether further work is needed.
Mold Trials & Part Approval
Trial parts show how the transferred mold performs in the production setup at Flymould. We check the samples against the agreed drawing and acceptance references.
Establish the Trial Setup
We confirm the resin grade and trial requirements, then evaluate filling, part release, flash, visible marks and deformation. Previous process records provide a starting point where available.
Verify Critical Features
Dimensions are checked using suitable measurement methods. Appearance and fit are reviewed against agreed samples, drawings and mating parts; cavity coverage and report scope are agreed for the project.
Resolve Findings & Submit Samples
We review open issues with you, make agreed process adjustments or tool corrections, and recheck affected requirements. Samples and agreed inspection findings are submitted for your approval before production release.
Part Production at Flymould
Approved samples and agreed requirements become the reference for the first production run and subsequent orders.
Production & Process Checks
We use the agreed material, setup information and inspection requirements to prepare production. First-run and in-process checks focus on the features that matter to your part.
Mold Care & Repeat Orders
Maintenance arrangements consider the received tool condition, wear and expected use. Production findings help identify repair needs, which are discussed when they affect cost or scheduling.
Batch Records, Packing & Delivery
We agree batch identification, inspection records and packaging requirements with you. Order quantity, dispatch timing, destination and freight arrangements guide each shipment.
Your Mold Transfer Process
Review the Project
Share mold information, part requirements and expected demand. We review feasibility and the checks needed.
Receive & Prepare
The received tool is inspected. Necessary repairs or adjustments are reviewed with you before work proceeds.
Trial & Approve
We run trials, check the parts and resolve agreed issues before submitting samples for your approval.
Release Production
Approved references, order requirements and the agreed production schedule guide the first run and repeat orders.
Plan the Supply Transition
Tell us when you need the first parts and how long your current stock can support demand. We review the schedule around shipment, incoming checks, any tool work, trials and your sample approval. The production start date follows the agreed plan and trial outcome.
Start with What You Have
You do not need a complete tooling file to begin the discussion. Send the available information; we will identify what else is needed for a useful assessment.
To Begin the Review
- Part drawings or clear sample photos
- Mold photos, basic dimensions and current location
- Resin grade and known quality concerns
- Expected quantities and target delivery timing
Helpful If Available
- Mold drawings and cavity details
- Previous samples and inspection reports
- Process settings and hot-runner information
- Maintenance history and supplied accessories
Discuss Your Mold Transfer Project
Share your existing mold information, part requirements and production needs. We will review the available details and discuss the next steps with you.
Mold Transfer & Production FAQs
Can you take over a mold from another molding supplier?
Yes. We review existing molds for transfer from other suppliers to Flymould for part production. Acceptance depends on mold condition, compatibility with the production equipment and the part requirements. Share the available mold and product information for an initial review.
What if I do not have complete mold drawings or process records?
Send what you have, such as mold photos, basic dimensions, part drawings and samples. We identify information gaps during the review. Missing records may mean additional inspection or trials are needed before feasibility, cost and timing can be confirmed.
Can you repair or adapt the mold before production?
We assess repair and adaptation needs during review and incoming inspection. Suitable work can be supported by our in-house toolroom within the agreed scope. Proposed work, costs and scheduling effects are discussed with you before implementation.
How do you confirm that the transferred mold produces acceptable parts?
We run trials at Flymould and check the samples against the agreed drawing revision, appearance references and functional requirements. Findings guide process adjustments or approved tool corrections. Production release follows your sample approval and the agreed acceptance requirements.
How long does a mold transfer take?
Timing depends on the mold location, shipping arrangements, received condition, required tool work, trial findings and sample approval. Share your target first-delivery date and available stock so we can discuss a realistic transition schedule. A fixed transfer duration cannot be confirmed before review.
What costs should I expect?
The project may include mold transport, inspection, repair or adaptation, trials, sample checks and production. We review the applicable scope and clarify charges and responsibilities with you. Additional work identified after arrival or during trials is discussed before proceeding.
Can a mold located outside China be transferred to Flymould?
This can be discussed on a project basis. Send the mold’s current location, condition, available documentation and production requirements. We need to review feasibility and the required arrangements before confirming whether and how the transfer can proceed.
What should travel with the mold?
We agree the handover list for the project. It may include relevant controllers, accessories, spare inserts, drawings, process records and reference parts. Photos and a packing list help both parties check what was dispatched and received.