How to Prepare Your Drawings for a Custom Injection Molding Quote

Before requesting a quote for a custom injection molded part, gather the latest drawings and describe how the part will be used. A short note about the assembly, expected quantities, and approval process gives the supplier context for reviewing the files.

Send the Current 3D Model and 2D Drawing

Include a STEP model and a PDF drawing if both are available. The model shows the part geometry, while the drawing records dimensions, tolerances, and notes about appearance or inspection. If the design is still in progress, tell the supplier which details are open for discussion.

Make the Revision Easy to Identify

Use the same part number and revision in the file names and the inquiry. If you include an older revision for context, explain what changed. For example, point out a revised mounting hole or connector opening so the reviewer can find it quickly.

Show How the Part Fits Into the Assembly

If the part snaps into a housing or locates against a mating surface, include an assembly view or a marked-up screenshot. Add a note showing which surfaces touch and how the parts are assembled.

Identify the Features That Affect Fit, Function, and Appearance

Call out the features you will check during sample approval. For a housing, these might include the positions of mounting holes, the size of a connector opening, or the appearance of the front face.

  • Mark the surfaces that locate the part during assembly.
  • Identify openings, clips, and screw bosses that mate with other components.
  • Highlight the surfaces that will be visible on the finished product.
  • Share any inspection method you already use for critical dimensions.

Share Material, Color, and Finish Requirements

If you already have a specified resin, include the full grade designation. If the material is still open, describe the conditions the part will face in use, such as outdoor exposure, regular cleaning, or repeated handling.

Explain How You Will Approve the Appearance

Share any color chip, texture reference, or approved sample you have. If several parts will appear side by side, indicate which surfaces need to match. Annotate reference photos so the reviewer can identify the relevant face or finish.

Give a Quantity Range and a Target Date

Share how many samples you need, your expected first order, and an annual volume range if you have one. Include any date that affects the project, such as an assembly build that needs approved samples.

Planning Detail Example
Initial samples 30 parts for fit and assembly checks
First production order 2,000 parts after sample approval
Estimated annual volume 8,000 to 12,000 parts
Target milestone Samples needed before the next assembly build

Explain Whether You Need New Tooling or Have an Existing Mold

For a new part, say whether the design is still open to changes or already approved. If you plan to transfer an existing mold for production, include any available mold drawings, recent sample photos, and notes from the last production run.

Describe Any Issues You Want Reviewed

If a previous run had a recurring issue, show where it appears on the part and describe what you observed. Include the drawing revision and any measurements you already have.

Check Your Inquiry Before Sending

  1. Attach the latest model and drawing.
  2. Confirm the part number and revision.
  3. Highlight critical dimensions and visible surfaces.
  4. List the material, finish, and estimated quantities.
  5. State your target milestone and whether you have an existing mold.

If a requirement is still open, mention what you need to decide. That gives the supplier a specific question to address during the initial review.

Leave a Reply

Your email address will not be published. Required fields are marked *

Article Contents

Discuss Your
Custom Part Project

Tell us what you’re making. Include your expected quantities if you know them.

*All submitted business and project data are strictly confidential

Share the Post:
LinkedIn
Facebook
X
FLYMOULD

Get a Molding Quote

Custom injection-molded parts from first drawings to repeat production.

  • DFM review for your part
  • In-house tooling or mold transfer
  • Part inspection and repeat orders

Prefer direct contact?

peter@flymould.com Chat on WhatsApp

Production Inquiry

Request a Quote

Share your drawings, material requirements and target volumes. We’ll review your project and follow up with the next steps.

We’ll use the information you submit to review and respond to your inquiry.